| Pin-on disc |
|
 |
Sliding wear evaluations of engineering materials and coatings. Wear Mechanism & Failure Map Development. Lubricant Evaluations.
Capabilities:
Load Range: 0 - 2000 N
Speed Range 0 - 10 m/s
Heating stage |
| Controlled Environment Sliding wear |
|
 |
Pin-on-disc sliding wear evaluations of materials, in controlled atmospheres: e.g. Dry Nitrogen (Dew Point -80°C), vacuum, with heating facility.
Custom built at Sulzer Innotec.
Speed range: 0-10 m/s
Load range: 0-1500 N |
| Two-body Abrasion |
|
 |
Pin-on-disc sliding wear evaluations of materials, in controlled atmospheres: e.g. Dry Nitrogen (Dew Point -80°C), vacuum, with heating facility.
Custom built at Sulzer Innotec.
Speed range: 0-10 m/s
Load range: 0-1500 N |
| Micro-abrasion |
|
 |
Ball-cratering microscale abrasive wear test (Plint UK):
An abrasive slurry is fed into the contact region between a rotating ball and the surface of the material to be evaluated e.g. TiN coated tool steel. Wear rates are determined from the diameter of the imposed wear scar crater on the specimen. |
| Heli-erosion |
|
 |
Erosive wear properties of materials as a function of:
- Velocity
- Impact angle of erodent
- Particle size and mineralogy
|
| High Temperature Fretting |
|
 |
High temperature Fretting test rig heated by infra-red.
Capabilities:
Frequency: 1 - 1000 Hz
Amplitude: variable with frequency (up to 90 µm)
Maximal Load: ca. 100 N
Temperature: 20 - 1000°C
Geometries: rod-on-rod, ball-on-flat, flat-on-flat… |